aftermarket fusion alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / aftermarket fusion alarm wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

karlm

Member - Posts: 2

Joined: February 26, 2006

Location: New Zealand

Posted: February 26, 2006 at 9:20 AM / IP Logged

Hi there all. New Zealand calling. I recently stripped out my old car ( a 1986 mazda 4 door) fitted with a Fusion alarm model RX-104E-1. The alarm handled door locking and unlocking, had a LED in dash, a microwave sensor with a seperate microwave on/off switch a remote horn speaker and the rest was cabled into the loom. I would like to fit it to my new car but unfortunately have no scematic or wiring diagram. Some detail is on the alarm pcb itself but any help anyone here might be able to provide would be gratefully recieved. Regards Karlm

karlm

Member - Posts: 2

Joined: February 26, 2006

Location: New Zealand

Posted: February 26, 2006 at 9:30 AM / IP Logged

ps i should have added that the alarm is about 4 years old..its hard to know. It was in the car when I bought it. It may be that the answer may be to purchase a new alarm but Id like to at least try to get this one going. karlm

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

aftermarket fusion alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.