Databus for Nissan

Where and what color is the databus wire for an 05 Nissan Maxima Thanks Tad

Blue is the number 6 wire coming from the canbus "high" connector. Pink or yellow is the "low" at number 14.

That is for the 05. Is the 04 the same? My bypass has only one wire to the databas.

found the wire I needed. Is there a way to test the data wire? (Like testing it with a logic probe?)

I lied, well the tech lied I STILL GET FIND THE DATABUS WIRE!

I don't know which bypass module that you are using, but there are two wires at the OBDII connector, there are two possibilities for your solution. One is a "high" output, the other is a "low". Depending on which mod you have will depend on which one that you'll use.

I'm using the XY520 from Trilogic

Ok, here's 5 places you can tap from on the '05 maxima (you should be able to find at least one! ) 1) From the ECU Pin 86 CAN Communication L - Pink Pin 94 CAN Communication H - Blue 2) From the Body Control Module (BCM) Pin 40 CAN Communication L - Pink Pin 39 CAN Communication H - Blue 3) FRom the DataLink Connector Pin 14 CAN Communication L - Pink Pin 6 CAN Communication H - Blue 4) From the A/C Amp Pin 11 CAN Communication L - Pink Pin 1 CAN Communication H - Blue 5) From the Display Unit Pin 16 CAN Communication L - Pink Pin 14 CAN Communication H - Blue

I'm now thinking I have a bad bypass. I have tried everything. Is there a way to test for these wires with a logic proe?