dome light problem

Home / the12volt's Install Bay / Car Security and Convenience / dome light problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

leenred

Member - Posts: 9

Joined: February 05, 2006

Location: United States

Posted: March 17, 2006 at 8:38 PM / IP Logged

I installed a Hornet 564T into a 2005 honda pilot. I didn't connect the alarm dome light supervision since it has it from the factory. The problem I'm having is that I remote start the vehicle, than I disarm the alarm. The dome light stays on after I put the key in the ignition. The light goes off only if I open the door and close it again. How can I fix this problem. Thanks in advance.

mad550

Copper - Posts: 201

Joined: February 23, 2006

Location: Australia

Posted: March 18, 2006 at 12:01 AM / IP Logged

Put a diode inline with the door sense wire, it could be getting a ground through the alarm.

WOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.