prestige aps 997 transmitter programming

Home / the12volt's Install Bay / Car Security and Convenience / prestige aps 997 transmitter programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

razafina

Member - Posts: 3

Joined: March 18, 2006

Posted: March 26, 2006 at 9:04 PM / IP Logged

Hi everybody ,I installed my prestige aps 997 everything works except I cannot find any where in the manuals what buttons or combinations of buttons to push to use channels # 4 thru #7,channnel # 3 is clearly stated to be the trunk released,but thats is as far as it goes in the installation manual.

The user manuals just says to mark down the combination of buttons to operate each additional channel and that is it.

I hope somebody in the forum has the knowledge and is familiar with the audiovox pretige lines.

Thanks for Your time. prestige aps 997 transmitter programming -- posted image.

doibuy

Copper - Posts: 177

Joined: March 15, 2006

Posted: March 26, 2006 at 9:11 PM / IP Logged

Channel four is your option button. As for the rest I've never seen it in the manual either, but you can program them to which ever button combination you would like. Turn on ignition, press the valet 3 times, horn honks once, press lock, press valet-horn honks twice press unlock, press valet-horn honks three times press key button, press valet-horn honks four times press option, press valet-horn honks five times, press combination of buttons for channel five, and so on for channel 6 and 7.

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: March 27, 2006 at 4:14 AM / IP Logged

You have to program channels 4 through 7. Just follow doibuy instructions. Also remember to do it for both remotes.

razafina

Member - Posts: 3

Joined: March 18, 2006

Posted: March 27, 2006 at 6:16 AM / IP Logged

I can thank this forum enough for the quality people and quick responses,thanks guys, I will do just as you guys say and I am sure it will definitely work.

Thanks again for your quick responses. prestige aps 997 transmitter programming -- posted image.

john ogrady

Copper - Posts: 82

Joined: February 25, 2006

Location: Canada

Posted: March 27, 2006 at 8:09 PM / IP Logged

Most Alarms or remote car starters are either 3 or 4 channels .Your keychain transmitter can handle up to 7 channels.These extra channels on your transmitters can be used to control another vehicle.For example you have another member of your family with a Audiovox remote starter in their vehicle.You can program the extra channels on your transmitter to work the other vehicles remote car starter.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

prestige aps 997 transmitter programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.