Code Alarm TW1

Home / the12volt's Install Bay / Car Security and Convenience / Code Alarm TW1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lj808

Member - Posts: 1

Joined: April 20, 2006

Location: United States

Posted: April 20, 2006 at 2:30 PM / IP Logged

I have a TW1 installed on a 04 Concorde. The remote start just quit working one day. It doesn't power up or anything. There was no hood pin installed, not programmed to tach, and no valet on/off switch. I did manage to find a programming button for it. It shows a LED message of 5 flashes. The manual does not help at all. Anybody have any ideas?

lj808

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 21, 2006 at 10:51 PM / IP Logged

Check the fuses for the remote start relays. There should be one fuse for the alarm's main power, one on the parking light output and possibly 2 fuses for the actual remote start. A relay may have failed as well, or a wire could have come loose.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Code Alarm TW1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.