05 dodge magnum, alarm/remote start

i can't get my hands on the correct door lock bypass for a 05 dodge magnum. could i use a 456lw

The 456L will work as a door lock interface in the 05 Magnum. Directechs lists that the factory alarm will arm when locking with the door open, but can only be disarmed with the factory remote. You do not mention what type of device you are installing, but if it is a remote start you may want to take a look at this piece, it will lock/unlock, arm/disarm, and has a Sentry chip in it that can be used for transponder bypass. Hope this helps.

i'm installing a galaxy 5100rs remote start alarm. i've been trying to get the chrysler Doorlock Alarm & Interface/Bypass (CHDL7-PK2)for a while now but i'm not a dealer. so i'm going to just do it indivually. one for the trasnponder and another for the door locks and trunk.

i'm using the 556u for remote start bypass. can anyone think of anything else i will need or could use. i really don't want to use the 451m.

darkjocker wrote: Me I use a CAN-SL for doorlock factory alarm, tach output and more for transponder you can use a Pats chrysler 04 +

where do i get one of those

I was trying to get a remote start diagram for a 05 magnum. i did a search on the site and all the links don't work. could someone post the diagram.

anyone have one.

Try this link it directwire info. Hope it helps.

yes thank you. i'm installing the galaxy 5100-rs and it keeps running after the key is removed, any ideas. also on wiring the 456lw.

Do you mean it keeps running even after you hit the brakes to shut remote start down?