Toyota dealer installed start-inhibit

Home / the12volt's Install Bay / Car Security and Convenience / Toyota dealer installed start-inhibit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

csorb

Copper - Posts: 317

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 28, 2002

Location: United States

Posted: January 06, 2003 at 8:12 PM / IP Logged

Hi! I installed a remote-start/keyless into a 97 Avalon. A starter-kill and led was installed by a Toyota dealer. The led plate says Toyota on it. I would like to know if I can remotely interface this system with my newly installed piece. The normal factory arm and disarm wires don't work. Thanx

Chaim

csorb

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 06, 2003 at 8:58 PM / IP Logged

If it is a factory option then you should be able to use it. If it is a Dealer installed aftermarket option then you prob wouldn't be able to integrate the two alarms. If all you want to use is the LED then that is possible depending on whether or not the alarm output is the same as the led, some are 2V and some are 12V. The dealer options are usually just an add on keyless entry alarm and the new alarm/rs would basically take over any functions that the dealer option would have.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Toyota dealer installed start-inhibit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.