Hornet 563T Keyless Entry

Hello All,

Thank you 12volt for a great site.

I had a Hornet 563T installed in my 2000 Astro Van, which does not have power door locks. I see that the alarm can also access power locks, my question is what do I need to install the door locks? And I did not get the install manual with it, so what wires do I hook the locks up to.

Thanks for all your time and help with this

Paul Morton

P.S. I seen this on Ebay 2-PACK of HEAVY DUTY DOOR LOCK ACTUATORS LIKE 524N. Will this work to lock and unlock the doors, and should I put a 12v relay to activate the actuators? or will the 563T handle this?

Again thanks for your help.

Paul

Thank you Twelvoltz for your reply. Here is a link to the item on ebay, I klnow this is a long link, but if you have the time let me know if this is what I need.

Again thank you for you kind help with this and have a great holiday..

https://item.express.ebay.com/Consumer-Electronics_Car-Electronics_Car-Alarms-Security_2-PACK-of-HEAVY-DUTY-DOOR-LOCK-ACTUATORS-LIKE-524N_W0QQitemZ9711096044QQptdnZCarQ20AlarmsQ20Q26Q20SecurityQQddnZConsumerQ20ElectronicsQQadnZCarQ20ElectronicsQQcmdZExpressItem

I did get the 524N and the 451M relay kit. I started to install it today, I did the drive side and it works great. I had to pull the unit down to install the little white cable from the 451M and now the alarm will not work the status light is on all the time when the key ignition is off and ideas what would cause this???

Paul

P.S. I did look at all connections and it looks ok

Twelvoltz,

Your the best! that did it. Thanks for all your help.

Paul