Lock / Unlock Control?

Home / the12volt's Install Bay / Car Security and Convenience / Lock / Unlock Control? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vsx123

Member - Posts: 10

Joined: April 26, 2006

Posted: June 02, 2006 at 2:00 PM / IP Logged

I have a Clifford AvantGuard 5 and the following problem. When the car is shut off the doors unlock. Now if I disable the unlock feature on shut off, the doors won't unlock but they unlock when I press the button to lock/unlock on the remote. My question is, can the status for the door lock be changed so that the alarm would use the driver door lock to determine if the car is locked or not so when I press the button on the remote, the car will lock and not unlock first ?

spp8969

Member - Posts: 3

Joined: May 13, 2006

Location: United States

Posted: June 02, 2006 at 2:27 PM / IP Logged

i'm not sure if i fully understood your question, but usually it is up to your alarm system.

1. is it factory installed or not, if not make sure that you find your installation instructions book!?

2. does this problem just appeared or is this the way you got the car and its always been like this?

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 02, 2006 at 2:34 PM / IP Logged

no, the ignition controlled door locks only works as an on -off feature not controlable. not even new cars unlock doors automatically they lock but only aftermarket devices can unlock the doors auto controlled by the ignition.

hope this answers the question.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

vsx123

Member - Posts: 10

Joined: April 26, 2006

Posted: June 02, 2006 at 2:54 PM / IP Logged

I am talking about the AvantGuard...If you go into the options you can lock the doors either when the engine is started or when you reachcertain RPM. Clifford also has an unlock option which can unlock the doors when the ignition is turned off.

Now, if you don't use the automatic unlock, what happens is that when I press the remote, the car will first unlock. I'd like to lock or unlock based on driver's door so that if the door is locked the car unlocks and if the door is locked the car will unlock regardless of the other doors.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lock / Unlock Control?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.