compustar remote issues

Home / the12volt's Install Bay / Car Security and Convenience / compustar remote issues (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

1herm4matrix

Member - Posts: 2

Joined: May 18, 2006

Posted: June 12, 2006 at 6:39 PM / IP Logged

i just installed a 2wssr system in my 2003 toyota matrix but i cant get the remote to program. i have done a search on this site and there is tons of information on this. i have tried just about everything to try to get this thing to work. i purchased two of these systems so have swaped out the brain and tried a second remote,still no luck so i'm assuming the trouble has something to do with my wiring. the only wire that i think might be causing my problem is the cn1 pin 7 GREEN/ red wire. in the manual it says that this wire will "monitor the status of the vehicle and for programming". were should this wire be connected?? i connected at the ignition harness to the wire providing 12v when the key is "on".

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 12, 2006 at 7:56 PM / IP Logged

If you connected the GREEN wire to the BLACK/ white at the ignition then the other probable cause will be to relocate your ground wire to the system. Also, you must toggle the ignition 5 times within 3 seconds.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

1herm4matrix

Member - Posts: 2

Joined: May 18, 2006

Posted: June 12, 2006 at 8:02 PM / IP Logged

so this green wire should be connected to the BLACK/ white at the ignition harness?? iwill try this...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar remote issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.