04 mailbu disarm factory security

Home / the12volt's Install Bay / Car Security and Convenience / 04 mailbu disarm factory security (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xtremej

Gold - Posts: 1,440

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 24, 2006

Location: United States

Posted: June 20, 2006 at 11:36 AM / IP Logged

I installed a remote start on a 2004 malibu. The factory security goes off with this scenario, locked at the door switch and closed, unlocked by remote start remote. My question is if I pulse the ignition will it disarm the factory alarm so it doesn't go nuts? Or should I have them only use the aftermarket remote to control the locks?

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: June 20, 2006 at 4:10 PM / IP Logged

If you use the aftermarket system to pulse the ignition AND the transponder bypass, it should work.

Or, as you say, just tell them to pick one of the remotes for the locks, and stop using the other one.

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: June 20, 2006 at 7:59 PM / IP Logged

There is a light green wire in the driver's kick panel coming in from the door. A negative pulse through a 620 ohm resistor will disarm the alarm. A second pulse will unlock the doors. Use a relay to insure a proper ground signal through the resistor.

sparky

Back to Top

ushank

Member - Posts: 44

Joined: April 23, 2006

Location: United States

Posted: June 20, 2006 at 10:52 PM / IP Logged

Try using a by-pass module. Peripheral PPLXR (PLGML) You can also try the directed peice that can be picked up at any of your local alarm shops.

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: June 21, 2006 at 10:18 AM / IP Logged

Cool thanks for the reply.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 mailbu disarm factory security

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.