Alarm LED

Home / the12volt's Install Bay / Car Security and Convenience / Alarm LED (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scorpio007

Member - Posts: 2

Joined: June 24, 2006

Location: United States

Posted: June 30, 2006 at 10:42 PM / IP Logged

I am installing an alarm and would like to change the LED to a different style. The alarm LED output is 2.0 volts and the new LED is 3.7volts does anybody know if this will work, I don't want to damage anything. I know you can Burn out an LED with to much voltage, but what about the other way. Will this hurt the alarm module.

Keep it custom!

Back to Top

captainzab

Silver - Posts: 606

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 09, 2005

Location: United States

Posted: June 30, 2006 at 11:32 PM / IP Logged

it shouldnt, but if your worried you can always use a resistor

But i thought that leds are usually rated from a range, like 2-5ish volts

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm LED

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.