scanner

Home / the12volt's Install Bay / Car Security and Convenience / scanner (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stephen0715

Member - Posts: 15

Joined: February 05, 2006

Posted: July 01, 2006 at 10:05 PM / IP Logged

I install a scanner and connect it to the starter killer wire (yellow), when I arm the car, it works for only 30 seconds and then it goes off. Anyone has idea?

Back to Top

deezee

Member - Posts: 3

Joined: April 06, 2006

Posted: July 02, 2006 at 11:11 PM / IP Logged

instead you shoud tap the negetive of the scanner to the ground when armed wire if there is one and then just put the other wires of the scanner to 12v positive

Back to Top

stephen0715

Member - Posts: 15

Joined: February 05, 2006

Posted: July 09, 2006 at 1:58 PM / IP Logged

what if i don't have the negative wire when armed,where do i connect the wire to?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

scanner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.