Adding LED to factory 2000 Corvette alarm

Home / the12volt's Install Bay / Car Security and Convenience / Adding LED to factory 2000 Corvette alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

j84buick

Member - Posts: 21

Joined: September 13, 2002

Location: United States

Posted: July 05, 2006 at 8:02 PM / IP Logged

I would like to add a LED to the factory 2000 Corvette alarm. Anyone know where I can pull +12 when the alarm is on?

Back to Top

j84buick

Member - Posts: 21

Joined: September 13, 2002

Location: United States

Posted: July 05, 2006 at 8:09 PM / IP Logged

I could not find an edit function but I wanted to add a few things. I see another post very similar to this one. One thing I do understand is how to get a relay and hook it up when the car is turned off. That's pretty cheesy in my opinion. There has to be a way to tell if the factory system is armed....

Back to Top

captainzab

Silver - Posts: 606

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 09, 2005

Location: United States

Posted: July 06, 2006 at 12:37 AM / IP Logged

Aside from it being a vette, i dont think any factory alarm has a wire that gives a pulse when it is armed.

But for the ignition when off LED, i think the relay set up is like:

85 ground, 86 ignition, 87a 12v, 30 red wire of led, also you will need some resistors so that it equals 2v so you dont kill the LED.

Can someone check my relay setup to make sure its right.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding LED to factory 2000 Corvette alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.