clifford arrrow 3 door trigger

Home / the12volt's Install Bay / Car Security and Convenience / clifford arrrow 3 door trigger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: July 22, 2006 at 11:31 AM / IP Logged

I just installed my clifford arrow 3 into my 98 dodge intrepid.I hooked up the door trigger wire from the arrow 3 to my dome supervision wire,and if the system is armed and you open the doors,it will go off.But if i let it start to rearm on it's own,it will not sense that the door is open.Any help is greatly appreciated..

"ole blake"

Back to Top

glantern83

Member - Posts: 32

Joined: July 13, 2006

Location: United States

Posted: July 26, 2006 at 5:07 PM / IP Logged

I belive your problem is one in a feedback nature... Or maybe a time delay nature...

The best thing to do would be to use the door triger wire...

visit:

http://www.directwholesale.net/diagrams/diagram.asp?ModelID=14360&MakeID=16&link=BULLDOG

for info and a diagram for diode isolating... It's your best bet...

-KITT

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford arrrow 3 door trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.