Nissan Sentra Remote Start

Hey guys,

I have a 1997 Nissan Sentra with a Crimestopper CS-2011 IV alarm hooked up to it.  I have the remote start relay hooked up to the BLACK / YELLOW wire.  Apparantly these cars have two starter wires that need to be hooked up.  My question is when I hook the other relay up to the BLACK/ Blue wire, do I have to put a diode across the coil (terminals 85 and 86).  The reason I'm asking is the Crimestopper relay base has what looks like a diode in heatshrink across these terminals.  Any help is appreciated.

Thanks,

Erick

Ok.  I hooked up the second relay independent of the first relay.  When I push the remote start button, the engine cranks and tries to start but doesn't.  If I manually start the vehicle with the key and then push the remote start button, I get the chirp confirmation and I can remove the key and the engine stays on.  Obviously, I did something right because it works halfway.  What do I need to different, to get the vehicle to start without the key?

Thanks,

Erick