A/M alarm

Home / the12volt's Install Bay / Car Security and Convenience / A/M alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

abchase

Member - Posts: 4

Joined: July 28, 2006

Location: United States

Posted: July 28, 2006 at 1:08 PM / IP Logged

Ok, one of the guy's I work with, just bought a used truck. The truck has a CM2400, already installed. We've determined that it's either a CompuStar CM2400, or a First Tech, or maby even a Vision. I belive all three are related. It was installed into a 2003 Dodge Ram 2500 HD. We've got the unit to go into learning mode, but I cant seem to get it to respond to the remote I have. (a CompuStar s/n:004801, FCC ID: 044JR1600)

If there is anyone that could help it would be greatly appreciated....

abchase

Member - Posts: 4

Joined: July 28, 2006

Location: United States

Posted: July 28, 2006 at 2:22 PM / IP Logged

Ok my mistake it's a CM4200.

Not a Cm2400... Sorry

abchase

Member - Posts: 4

Joined: July 28, 2006

Location: United States

Posted: July 31, 2006 at 8:23 AM / IP Logged

BUMP!

Noone... A/M alarm -- posted image.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 31, 2006 at 8:56 AM / IP Logged

You must toggle the ignition switch 5 times within 3 seconds and press the lock button as well within this time frame. If you toggle the switch 5 times and you do not get 2 light flash response, then you did not toggle the switch fast enough.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

abchase

Member - Posts: 4

Joined: July 28, 2006

Location: United States

Posted: August 02, 2006 at 3:09 PM / IP Logged

Thank you for the responce. I've gotten' it into the programing mode. I just can't seem to program the reomte. But for an update, I did find out that.... The remote we got to replace the "missing ones" is AM, where as the remote we need is FM. I'll update when the new ones arrive.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

A/M alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.