compustar 2wss won't lock

Home / the12volt's Install Bay / Car Security and Convenience / compustar 2wss won't lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bonecutter

Member - Posts: 8

Joined: June 26, 2006

Location: Canada

Posted: July 30, 2006 at 9:51 AM / IP Logged

I have an 02 acura rsx and suddenly my compustar won't lock/arm. when I try it beeps 3 times and the remote shows an icon of the door lock pin going up and down. I've looked in tha manual and this icon isn't even listed. I've tried manually locking the doors and it still won't arm, doing the same thing.

Back to Top

maxcat

Copper - Posts: 211

Joined: June 26, 2005

Location: Canada

Posted: July 31, 2006 at 3:00 PM / IP Logged

The icon will either mean that one of your door wires is showing open when you try to arm or you can check your hood pin switch, this may also be in the open position. Make sure you are not getting a signal from any of these wires when tryin to arm the vehicle

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 01, 2006 at 9:02 AM / IP Logged

Make sure that the AUTO option is not engaged. This is an option that detects the remote control within 50 -75 ft of the vehicle and auto locks and unlocks the car within these parameters. If this is not the case, remove the door trigger harness fromthe CPU and then try to lock the doors. Post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

bonecutter

Member - Posts: 8

Joined: June 26, 2006

Location: Canada

Posted: August 02, 2006 at 1:04 PM / IP Logged

turns out it was the hood. Thanks guys

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 2wss won't lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.