hornet 553t shift problem

Home / the12volt's Install Bay / Car Security and Convenience / hornet 553t shift problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

metric motors

Member - Posts: 1

Joined: December 10, 2002

Location: United States

Posted: January 15, 2003 at 12:07 PM / IP Logged

installed a 553t on a 1997 chevy 2500 van. whenm remote start is used, the van has 3rd gear only. when started by ignition, van shifts fine. does anyone have any suggestions?

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: January 15, 2003 at 12:22 PM / IP Logged

that van has a second ignition it should be whie or pink\white at the igntion switch harness if it is not hooked up the vehicles transmission will not work properly you may also have to reset the vehiclies comp to do this disconnect the batt ground for about 15 min

steve sverdahl: installer\owner

morinville custom carsound

edm albetra swerks@shaw.ca

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hornet 553t shift problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.