compustar remote problems

ok i just installed a compustar 2w900fm and when i first installed it the 2 way pager was kinda working if would display on the screen if the door was locked or if the hood was open but know it does not display any thing every thing still works the remote start works and it locks and unlocks the car i tried to reprogram the remote by turing the key on and off 5 times and it did not solve the problem and also changed the batery but still no change and the alarm seams not want to go off if i lock the car and open the car with a key the alarm does not go off so some sugestions would be apreciated

As far as the remote goes, bring it in for warranty and hope the shop that you bought it from will give you warranty on it seeing that you installed it yourself. With the door trigger make sure that you used the correct door trigger ( + or - ) on the alarm system in comparison to the car itself.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

"ok i just installed a compustar 2w900fm and when i first installed it the 2 way pager was kinda working if would display on the screen if the door was locked or if the hood was open but know it does not display any thing every thing still works the remote start works and it locks and unlocks the car" Find a dealer tell they what is wrong. Use a bit $$$ send it in for service. A test of your door tigger wire is a good indication if the unit is working. Remove the tigger wire from the connection of your car. Arm the car, apply - or + to the trigger wire. Alarm goes off. Unit working like it should. You the installer have to get find the correct trigger wire to your car.   Be careful whose advice you buy, but be patient with those who supply it.

ok i was able to get it to work but i have no clue why it works know i was taking it out to check all the conections and after i pluged everything back in it was working so it is fine that its working know a couple more questions where can i get a shocksensor and how can i wire it up on my brain it takes plug and there is no wires

You can pick one up from me if you live in Toronto, but any Compustar dealer will have one avaiable if you asked. No wiring up require. Just a plugin. One end to the unit, the other to the shock sensor.Be careful whose advice you buy, but be patient with those who supply it.