parking light wiring, 03 dodge diesel

Home / the12volt's Install Bay / Car Security and Convenience / parking light wiring, 03 dodge diesel (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

expressfish

Member - Posts: 3

Joined: August 31, 2006

Location: United States

Posted: August 31, 2006 at 3:41 PM / IP Logged

yanked my alarm from my 03 hemi and installed it in an 03 diesel<<<both dodges. Everything works but the flashing parking lights. The alarm is a mothers window tint special, the white wire connects to the purple / YELLOW on the dodge light harness, worked on the hemi , but same wire on diesel will not flash lights !! any input ??

Eric G......

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 31, 2006 at 4:19 PM / IP Logged

Parking lights require a negative trigger thru a 330 or 1.4K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch.

Did you grab the relay as well when you removed it from the Hemi to the diesel ??

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

expressfish

Member - Posts: 3

Joined: August 31, 2006

Location: United States

Posted: August 31, 2006 at 4:36 PM / IP Logged

yeah, I all the relays were taped together. I wired it jsut as on the hemi. does the cummings have a different wiring harness ? the harness off the light switch has the same colors .

Eric G......

Back to Top

expressfish

Member - Posts: 3

Joined: August 31, 2006

Location: United States

Posted: September 01, 2006 at 11:13 AM / IP Logged

so does the resistor go between the purple / YELLOW wire and relay ? the white wire going into the relay id hot and coming out is neg.

Eric G......

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

parking light wiring, 03 dodge diesel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.