2000 maxima remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 maxima remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

zshopa

Member - Posts: 10

Joined: December 15, 2005

Location: United States

Posted: September 19, 2006 at 9:50 PM / IP Logged

hello everyone,

i am currently installing a remote starter/ alarm into my 2000 nissan maxima, so far everything is connected. everything works except the remote start function, i think my problem may be that im not connecting the bypass module correctly. ive never installed one like this and dont know how to apply that ring from the 556u, what happens is i press the start button on the remote, the car seems to go to ACC/ON and then it clicks off in about 1 -2 seconds no cranking begins. please let me know what possible solutions i can try or anything. i appreciate any help.

Thank you,

DAve

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: September 19, 2006 at 10:24 PM / IP Logged

To verify that the problem is with your transponder bypass, simply leave a working key in the vehicle's ignition in the off position and try to remote start the vehicle. If the vehicle starts and runs then you know the bypass is where your problem lies. If the car does not start up and run then you will need to recheck your wiring at the ignition.

Hope this helps.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 19, 2006 at 10:28 PM / IP Logged

Dave, have you also checked to see if the STARTER output is infact sending a 12 volt signal to the starter wire that you have ? Make sure that you didn't wire the starter disable relay backwards.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

zshopa

Member - Posts: 10

Joined: December 15, 2005

Location: United States

Posted: September 19, 2006 at 10:47 PM / IP Logged

ok so i tried it with the key in the off position and it did not work, now the model i have is Ultrastart 1270TL any possible things that i may have missed?

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: September 19, 2006 at 11:53 PM / IP Logged

--Even if the transponder bypass is wrong, Nissans will still crank; they just won't start.

--If you have any doubts at all about the bypass, simply unplug it, stick a key in the ignition, and try to remote-start the car.

--Have you powered up both starter wires in the Nissan?

dcman41

Copper - Posts: 211

Joined: October 21, 2005

Location: United States

Posted: September 20, 2006 at 12:07 AM / IP Logged

You need too hook up both starters. Also make sure your starter wires arn't backwards if you did a starter kill/antigrind.

zshopa

Member - Posts: 10

Joined: December 15, 2005

Location: United States

Posted: September 20, 2006 at 4:34 PM / IP Logged

ok im gonna try and reverse the starter wires i may have them backwars

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: September 20, 2006 at 5:10 PM / IP Logged

Just fyi the 1270tl is just a remote start not an alarm.....

zshopa

Member - Posts: 10

Joined: December 15, 2005

Location: United States

Posted: September 20, 2006 at 5:12 PM / IP Logged

i tried to switch the starter wires, but im not getting any different results

and i tried unplugging both starter wires and got the same result..... i dont know where i went wrong with this i never had this problem on my accord, is there anything i need to do different on the maxima?

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: September 20, 2006 at 5:32 PM / IP Logged

Try this run your start directly from the remote start BLACK/ dark red I believe this is the primary start wire the BLACK/ blue is for cold start up, but for testing try the blk/ dark rd. Have you learned the tach before trying to remote start?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.