98 grand prix factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / 98 grand prix factory alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: November 15, 2006 at 6:00 PM / IP Logged

We installed a remote start and keyless in this car

we cant control the factory alarm to arm with our system

Wire magic says the factory alarm can be programed???

Does any1 know how to do this?

We have the driver door pin getting a - trigger pulse when locked to arm the factory alarm but it wont.

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: November 15, 2006 at 6:22 PM / IP Logged

Wire Magic lists the instructions for procedure to reprogram the factory alarm in one of their graphics. You need to use one of the factory keyless remotes and at least one key. It says you need to use two keys, but the second is only used to activate the cars disarm wire. This can also be done with a jumper wire at the BCM.

sparky

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 grand prix factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.