94 LHS disarm wire

Home / the12volt's Install Bay / Car Security and Convenience / 94 LHS disarm wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

amazingaudio

Member - Posts: 22

Joined: November 03, 2005

Location: United States

Posted: November 18, 2006 at 1:29 PM / IP Logged

I have installed an autopage rs600 in a 94 chrysler LHS and when I start the vehicle the alarm goes off(factory). The car arms with the lock on keyless. I have tried hooking up the disarm wire to the Lt. Green and orange wire in the drivers kick but it didn't change anything. I meterd the wire also and it is not getting ground when i disarm system with factory remote either so I don't think this is even the right wire.

Any help would be great thanks

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 18, 2006 at 2:54 PM / IP Logged

It won't show a negative when you use the factory remote. Turn the key in the drivers door cylinder to unlock, that's when you should get your pulse...

Mike M2

Tech Manager

CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 LHS disarm wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.