Jeep Grand Cherokee, remote start

Home / the12volt's Install Bay / Car Security and Convenience / Jeep Grand Cherokee, remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rumy

Member - Posts: 2

Joined: November 21, 2006

Posted: November 29, 2006 at 11:33 PM / IP Logged

Hi guys,

First of all i must say this site has been really helpfull, I have a huatai 2 way car alarm and remote starter system, i have done most of the wire, the only thing I need help with is the engine on signal wire.

My remote starter is not like any other starter that uses a tach wire, the wire looks for + 12 v from a ground. So basically when the engine is off it wants it to be -ve and when its on it wants it to be +ve, it asks me to connect it to a oil pressure light,

can any one help me locate the wire.

thanks a tonn in advance.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 30, 2006 at 3:41 AM / IP Logged

What did you put in it?

Back to Top

rumy

Member - Posts: 2

Joined: November 21, 2006

Posted: November 30, 2006 at 4:07 AM / IP Logged

im sorry? I dont quite understand?

Back to Top

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: November 30, 2006 at 10:00 AM / IP Logged

when the engin is running the oil pressure doesnt send 12v first of all... you need a circuit on the motor that only produces 12v while the ening is running... I have heard of this before, but good luck in a jeep..I suppose you could do it off the alternator or voltage regulator... why companies have to make products that really make NO sense, as far as the common installation practices is beyond me....

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Back to Top

start25

Copper - Posts: 114

Joined: November 22, 2005

Location: United States

Posted: November 30, 2006 at 10:10 AM / IP Logged

I installed this one before, and I just hooked it up to the tech wire.... Jeep Grand Cherokee, remote start -- posted image.

Works fine...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Jeep Grand Cherokee, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.