Bw 10000 immobiliser wiring
Home /
the12volt's Install Bay /
Car Security and Convenience / Bw 10000 immobiliser wiring (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: December 03, 2006 at 5:14 AM / IP Logged
Posted: December 03, 2006 at 10:09 AM / IP Logged
Posted: December 03, 2006 at 6:15 PM / IP Logged
alarm is bw 10000 ( black widow )- Black wired -installed into a 95 honda civic. I have everything installed central locking door switches etc... I have only the the immobiliser side of things to go. the alarm module has two sets of two cables labeled imob. both sets and both cables are black.
The manual says: This is the relay normal open 30a dry contact circuits. Cut and connect to an appropriate isolating Circuit. switched 12 volts, max 30amps.
Do i just cut the ignition wire and join meaning it has a relay in the unit
Both sets of wires have no voltage and dont ground?Hope this makes any sense 
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Tuesday, April 30, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, April 30, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
