Need some help 98 Tahoe install

Home / the12volt's Install Bay / Car Security and Convenience / Need some help 98 Tahoe install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

simonp5150

Member - Posts: 1

Joined: January 27, 2003

Location: United States

Posted: January 27, 2003 at 7:41 PM / IP Logged

I just purchased an autopage rs650 remote start/alarm and it's been driving me crazy to get it installed and working like it should. Ive got a chart that I found on this site but its not too clear for me. Do I need a passlock bypass module even though I don't have a special key? Does anyone have a better wiring diagram or instructions THANKS

Back to Top

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: January 27, 2003 at 8:21 PM / IP Logged

Yes you do need a Passlok II bypass module. It may not look it, but it is a special key.

Hak

Siemens Autostart

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: January 27, 2003 at 8:23 PM / IP Logged

you will need a passlock 2 bypass module, for car info follow this link. good luck test all wires and also don't worry about the 3rd ignition wire, just make sure you power 1st and 2nd ignition and ACC.

Constant 12V+	Red	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Ignition 2	White	Ignition Switch Harness
Ignition 3	brown	Ignition Switch Harness
Accessory	Orange	Ignition Switch Harness (Heat/AC)
Tach	White	Coil
Brake Switch	White	Brake Switch
Trunk Release	Brown	Switch or Driver's Kick Panel
Trunk Pin	Purple (-)	4 Pin Black Connector Driver's Kick Panel
Parking Lights	Brown (+)	Light Switch
Head Lamp	Yellow (+)	Light Switch
Factory Disarm	Tan	Keyless Entry right of Column
Door Trigger	Purple (-)	Either Pin Switch
Door Lock	Light Blue	Above Accelerator Pedal at Factory Relays
Door Unlock	White	Positive Trigger
Horn Wire	Black (-)	Steering Column

Back to Top

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: January 28, 2003 at 8:49 PM / IP Logged

Yes you do need a Passlok II bypass module. It may not look it, but it is a special key.

While it is true that it does have Passlock II, It is not true that it is a special key. Passlock uses ordinary average everyday keys. You can go anywhere and get a key cut. As long as the ignition turns with the key the vehicle will start.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need some help 98 Tahoe install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.