2000 Accord, factory alarm disarm

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Accord, factory alarm disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cpugh

Member - Posts: 17

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 27, 2006

Location: United States

Posted: December 13, 2006 at 2:20 PM / IP Logged

I need help finding hte wire that is the factory alarm disarm. I have looked at the wire diagram that is listed on this site and all it says is w/locks. Can someone tell me what this means?

Thanks

cp

Back to Top

kaezoo

Copper - Posts: 125

Joined: April 26, 2005

Location: United States

Posted: December 13, 2006 at 2:39 PM / IP Logged

It means that that the factory alarm disarms when the key is turned in the door, and that this action also unlocks all the doors. The diagram simply uses the wires that monitor the door key switch to do all the locking and unlocking functions as well, so whenever the aftermarket system unlocks the doors it also disarms the alarm.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 13, 2006 at 4:12 PM / IP Logged

FACTORY ARM

Arms with lock wire

-

Use these wires for vehicles with factory alarm only. They are found in the green connector at the top of the passenger side fusebox. Disarm without unlock is BLUE inside driver's door. For Accord LX with no factory alarm, use BLACK/ WHITE(lock) and GREEN/ RED(unlock) found on a two pin plug at the front of the driver's side fusepanel.

FACTORY DISARM

Disarms with unlock wire

-

Use these wires for vehicles with factory alarm only. They are found in the green connector at the top of the passenger side fusebox. Disarm without unlock is BLUE inside driver's door. For Accord LX with no factory alarm, use BLACK/ WHITE(lock) and GREEN/ RED(unlock) found on a two pin plug at the front of the driver's side fusepanel.

Back to Top

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 13, 2006 at 10:57 PM / IP Logged

If its a lx it will only arm and disarm with factory remotes. If its an ex it will arm and disarm with lock and unlock. If you are wanting to disarm without unlocking doors, on the ex its a blue wire in the drivers door at the power window switch, If its a lx the wire is at the factory keyless/alarm module attached to the drivers underside dash panel.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Accord, factory alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.