valet 561R

Home / the12volt's Install Bay / Car Security and Convenience / valet 561R (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: December 22, 2006 at 8:07 AM / IP Logged

Quick question. I know these units will pulse (-) for the door locks. I guess my question is if there is an application to pulse a (+) will these work if I switch the wires from blue as unlock and green as lock to green as unlock to blue as lock or vise versa? I know when I installed prestge's they worked this way.

MECP certified (If it really means anything)

Jeremy

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 22, 2006 at 8:28 AM / IP Logged

On the transmitter, won't lock become unlock and visa/versa ?

A NEG(-) output can only become a POS(+) if it is programable, or by the use of a relay.....

Back to Top

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: December 22, 2006 at 8:34 AM / IP Logged

On the prestige units, it had the 2 wires for lock and unlock, lets say blue and green. Now if you had a (-) trigger locks the green would be used for lock and the blue would be used for unlock. If you had (+) trigger locks, now the green wire would unlock and the blue would lock. There was no programming need to pull this off.

I just want to know if the 561r does the same.

MECP certified (If it really means anything)

Jeremy

Back to Top

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 22, 2006 at 8:44 AM / IP Logged

No the 561r says in the manual it will but this is a misprint, they will only do neg.

Back to Top

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: December 22, 2006 at 9:05 AM / IP Logged

Thank you.

That was the info I was looking for!

MECP certified (If it really means anything)

Jeremy

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 561R

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.