2006 hyundai sonata, window module

hi there, i am trying to fit a 4 window closure module to a 2006 Hyundai Sonata. The 3 passenger windows all have 2 wire reverse polarity motors and rest at ground switches but the drivers side window motor has 5 wires ...1 permanent 12 volt positive...1 permanent grounded negative...2 sensor wires for up and down and 1 wire which goes to the bcm....... The motor has a built in relay with hall effect sensor and shunt resistor.

The drivers side switch is auto up and auto down and the window will reverse from up to down movement if it senses any force or pressure when it is in the up position...Can anyone tell me how to wire the window closure module to the drivers side motor and if i will need to wire a relay to reverse the polarity

                                     many thanks

                                           yam900