the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 buick lesabre, alarm/remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: December 31, 2006 at 3:36 PM / IP Logged  
I have installed a dozen or so remote starts but this is the first with a data wire for alarm bypass. I have done gm's passlock so is the passkey done the same way?  I have found differant wiring info on this so could someone post  the actual diagrams. I have bought a 555g and wiring diagram says I need to hook purple wire to data at the ignition but can't find diagram that tells which wire this is   thanks   steve
2003 silverado2500HD LT crew cab
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: December 31, 2006 at 3:46 PM / IP Logged  
Hook up to the purple wire at pin two of the data conecter under the dash
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: December 31, 2006 at 4:34 PM / IP Logged  
thanks but exactly how do I do that, do I need some sort of connecter to plug in the front and how do I know exact location of that pin
2003 silverado2500HD LT crew cab
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: December 31, 2006 at 4:37 PM / IP Logged  
also what are the colors for the ignition wires to hook up to the pink/black and the pink wires of the 555g
2003 silverado2500HD LT crew cab
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: January 01, 2007 at 10:49 AM / IP Logged  
ok maybe i'll explain a little better, does anyone know the colors of the specific wires for the 555g pinkignition (ecm side)- pink/black(key side) to match up to at the key cylinder or how to find which one is which. I know these are thin gauge wires and I have done many passlock ll but this is the first passlock lll and I've always been able to find the ones I needed ina diagram but now I cant seem to find specific wires  thanks for your time
2003 silverado2500HD LT crew cab
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: January 01, 2007 at 1:00 PM / IP Logged  
Why mess around with the 555G?
Get a GM-DLBP from bypasskit.com, and it does locks, trunk, factory arm/disarm, as well as Passkey III bypass, all with one piece.
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: January 01, 2007 at 1:16 PM / IP Logged  
yes but this is for my mothers car and my father bought her a standard starter without the unlock/lock so I purchased the 555g thinking this would be what I needed,  he bought it thinking that I could install it because I was able to do so on her '96 regal but that was differant system with wires coming from key cylinder and this one has a black control type of box with 5 wires coming from it from left to right -   purple,purple,black,pink, orange so which of these do I cut and which one do I splice into
2003 silverado2500HD LT crew cab
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 01, 2007 at 5:41 PM / IP Logged  
I suggest getting a databus module for this vehicle so you don't have to grab the OEM alarm disarm wire in the door. Trying to get from the driver's door to the inside of the vehicle is an absolute pain.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
steve700xedge 
Member - Posts: 28
Member spacespace
Joined: December 27, 2004
Location: United States
Posted: January 01, 2007 at 8:27 PM / IP Logged  
ok if I get agm-dcbp just exactly do you go about connecting to data ports( I mean do I need come sort of a special connector to plug in or just splice into the wire coming out of the port)
2003 silverado2500HD LT crew cab
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: January 01, 2007 at 8:58 PM / IP Logged  
the purple wire at the obdII connector. just solder into the wire
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer