99 neon, crimestopper rs900 III

Home / the12volt's Install Bay / Car Security and Convenience / 99 neon, crimestopper rs900 III (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 03, 2007 at 5:43 PM / IP Logged

Anyone have tips on installing this? Do I need relays for this install? How 'bout for the door locks?

Thanks

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 03, 2007 at 8:26 PM / IP Logged

you need relays for the doorlocks-they are reverse polarity.You might need a ignition bypass module if you have a grey headed key.

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 04, 2007 at 6:40 AM / IP Logged

Thanks, It's been a while since I've done any car installs. I'll look for the reverse polarity diagram.

And the key is NOT grey. So I should not need any relays for the remote start right?

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 04, 2007 at 6:55 AM / IP Logged

If the key is black you are good to go!(no bypass).

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 04, 2007 at 9:55 AM / IP Logged

Actually... the key is just a key.... bought the car used and that is all it came with.... no plastic on the top of it.

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 04, 2007 at 10:10 AM / IP Logged

your wasting time at your computer,get that remote start installed!LOL

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 07, 2007 at 8:50 AM / IP Logged

I've installed the started. Works great. I have one problem/question. The wire for the parking lights does not work. supposed to be BLACK / YELLOW at the switch. Tried and does not flash or turn on parking lights. Any clues?

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 07, 2007 at 6:37 PM / IP Logged

Was the wire positive or negative polarity.. Did you check with a meter?? The default parklight output on that Crimestopper is positive, so you don't want to just hook it to any wire with out checking it first. If the wire you tried showed 12 volts with the switch on park lights then you need to check the output of the R/S..

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 08, 2007 at 4:30 AM / IP Logged

Thanks ... Will check today when I get home. Wire was 12 volt without switch on.

bbrent

Member - Posts: 6

Joined: January 03, 2007

Posted: January 08, 2007 at 5:05 AM / IP Logged

What diagram would I use for the door locks being reverse polarity?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.