Window roll up module, alarms, central loc

Hey all, I was installing my new alarm i received today for Christmas in my Nissan Silvia s13, i came across a few complications with: -the original central locking, connecting the actuators to the alarm and making them work do i need a relay or something of the similar to make it work????? i already tried to connect the 2 wires coming from the alarm to the actuators and all i got was blown fuses??? should i connect it to the Nissan door control module with a relay??? -secondly, the drivers side switch on the power windows does not work i was going to fix it when i installed the alarm and i don't know where to start any advice???? do nissans have 2 window box modules - and thirdly, with the alarm i received a window wind up module so when i lock my car the windows go up at the same time i tried connecting this and it don't work again?????/ Any help would be greatly appreciated, CHEERS.

all rite got more info, i got the links here to the alarm and the window module. -http:///.com.au/NEW-REMOTE-ENGINE-START-CAR-ALARM-IMMOBILISER_W0QQitemZ140068914394QQihZ004QQcategoryZ31250QQrdZ1QQcmdZViewItem -http:///.com.au/DEI-530T-POWER-WINDOW-ROLL-UP-MODULE-PYTHON- HORNET_W0QQitemZ280065788724QQihZ018QQcategoryZ31250QQssPageNameZWDVWQQrdZ1QQcmd ZViewItem info on the c/l brain: *GREEN/ black wire- active at unlock neg at lock and rest *Green-active at lock neg at unlock and rest *black-neg *Orange-Stays active on lock and ground at unlock *WHITE/ red-Always active and my alarm has a lock and unlock wire and 3 different ways of hooking it up: negative trigger positive trigger and positive/neg trigger. I have looked at the relay page and still got no idea any help would be good Hope this helps

Your links aren't working for me when I cut/paste them. Please check those.