Remote Start, 95 mazda mx3

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start, 95 mazda mx3 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

elnoyl

Member - Posts: 8

Joined: May 14, 2003

Location: United States

Posted: January 07, 2007 at 1:39 AM / IP Logged

I'm in the process of trying to get a compustar 2w900fm as into a 95 mazda mx3. Everything seems to work fine other than the remote start. I tell the car to start and it gets stuck on the on position where the warning lights are on but the starter doesn't turn. I have all the ignition wires hooked up along with, foot brake, door trigger, tach sensing wire. The car is an automatic and does have an automatic brain with it. I followed compustars directions to the T from there install manual. Any help is greatly appreciated thanks in advance,

max

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 07, 2007 at 8:42 AM / IP Logged

Wire/Function	CM3000	Colour	Location/Description	Polarity
12 VOLTS	RED (CN1)	Black	Ignition harness	+
IGNITION	GREEN (CN1)	Blue	Ignition harness	+
IGNITION 2	GREEN (CN2) + Relay	BLACK/ red	Ignition harness	+
ACCESSORY	WHITE (CN1)	BLACK/ white	Ignition harness	+
STARTER	YELLOW (CN1)	BLACK/ blue	Ignition harness	+
KEY SENSE		Blue/red or White	Ignition harness	-
TACH SIGNAL	YELLOW/BLACK (CN3)	Yellow/blue	At coil or distributor	AC
LOCK	BLUE/BLACK (CN4)	Must add actuator
UNLOCK	BLUE (CN4)	Must add actuator
DOORPIN	RED / WHITE(-) or RED(+) (CN3)	RED / white	At either pinswitch	-
TRUNK PIN	VIOLET/BLACK (CN3)	Red	At light in trunk	-
TRUNK RELEASE	VIOLET/WHITE (-) (CN4)	Manual release
BRAKESWITCH	LT.BLUE/WHITE (CN3)	Green	At switch above brake pedal	+
PARKLIGHTS	GREEN / WHITE (+) (CN1) or (-) (CN2)	RED / black	At fusepanel	+
HORN	WHITE (-) (CN5)	GREEN/ black	At steering column	-
DRIVER WINDOW UP		RED / black	At main window switch	REV POL
DRIVER WINDOW DOWN		RED / green	At main window switch	REV POL
PASSENGER WINDOW UP		RED / white	At main window switch	REV POL
PASSENGER WINDOW DOWN		BLACK/ blue	At main window switch	REV POL
HEADLIGHTS		RED / blue	At light switch harness	-
REVERSE LIGHTS		RED / green	In driver's kickpanel	+
DIMMER		Red	At dimmer switch harness
VSS WIRE		PURPLE / white or PURPLE / orange	At ECM behind center console

Heres the tech sheet FROM Compustar, it shows the wires color from their brain, and where to connect it on YOUR car.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start, 95 mazda mx3

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.