the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Alarm w/factory Keyless Entry?


Post ReplyPost New Topic
< Prev Topic Next Topic >
01trublugt 
Copper - Posts: 112
Copper spacespace
Joined: January 08, 2007
Location: United States
Posted: January 08, 2007 at 2:46 PM / IP Logged  

Ok well I have been searching every vendor site, this board and every artical I could find on the net for this info.

Is there any stand alone car alarms that can be programed to use a factory keyless entry fob.

I know DEI makes an add on system but I am looking for something completely independant of the factory system. Normaly using an aftermarket FOB would not be an issue but the Keyless entry buttons ar on the key itself so it would seem stupid to have a key with buttons and a seperate fob for the alarm.\

Thanks.

Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: January 08, 2007 at 3:15 PM / IP Logged  
There is nothing I am aware of that would interpret the commands from your factory key fob to activate and deactivate an after market alarm.
All of the add on alarms I am aware of use the lock and unlock of the vehicle to arm and disarm.
01trublugt 
Copper - Posts: 112
Copper spacespace
Joined: January 08, 2007
Location: United States
Posted: January 08, 2007 at 3:28 PM / IP Logged  

OK Then on to the next question lol.

I am building a 67 Mustang and though it will be old I am still trying to add alot of modern features to it. I am using an ignition cyl off of an Acura which has a laser cut key...and the key that goes with it is a switchblade key with the keyless entry contols built into it.

Since this is a ground up build does anyone know where I can get the factory Acura keyless entry brain without going through a dealership???

Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: January 08, 2007 at 4:05 PM / IP Logged  
Go to some of the tuner / import car sites, those guys will strip things out and sell the origuinal parts... programing things may be a challenge
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
rudydapimp 
Copper - Posts: 390
Copper spacespace
Joined: February 27, 2006
Location: United States
Posted: January 08, 2007 at 4:09 PM / IP Logged  
there has to be something. heck, bulldog has remote starts that you can program onto your existing key fob. just did one on an alero.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer