the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Manual transmission remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Backlund 
Member - Posts: 4
Member spacespace
Joined: November 10, 2004
Posted: January 12, 2007 at 3:23 PM / IP Logged  
I understand that in order to use a remote start on a manual transmission, a safety sequence must be entered to arm the car. For those of you who are installers, after the car has shut off and is armed, is there anyway to open the doors of the vehicle without disarming the remote start?
For example, my car is armed but I remember I have to grab something out of it. Is there anyway I can open the door and grab my item without having to start the car and go through the sequence again to re-arm it? Thanks!
ihkili18 
Copper - Posts: 108
Copper spacespace
Joined: November 07, 2006
Posted: January 12, 2007 at 3:27 PM / IP Logged  
Na I dont think so at least not with the compustars
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: January 12, 2007 at 3:29 PM / IP Logged  

I don't believe there is with compustar or ultra's. I have heard that there is model that can be remotely put in reservation mode, I have not seen it though and I would not install it. What if you bump the gear shift into gear when your grabbing your cellephone, bag etc....Get my point?

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 12, 2007 at 3:34 PM / IP Logged  

You will NEED to start the car, then unlock to keep the rig "ready to remote start" There is no way around it IF it's installed correctly.

BE SAFE.....

evois 
Copper - Posts: 56
Copper spacespace
Joined: July 07, 2006
Location: United States
Posted: January 12, 2007 at 8:39 PM / IP Logged  
if you activate the turbotimer and leave the car and close the door, you will need to arm it manually.  can you still use remote start(for compustar) or it eliminates the reservation mode-hence no remote start
screemy1 
Member - Posts: 4
Member spacespace
Joined: September 11, 2005
Posted: January 14, 2007 at 4:38 PM / IP Logged  
hmmm....  when I was in high school back in 1993, a friend and I put a remote start on his Ford Ranger, we would put it in first gear with the parking brake on and remote start it from the steps in front of school.... it would just lurch forward and not start because of the break... it would confuse the crap out of our school mates......   all I remember doing was using a bunch of relays to bypass the clutch safety switch...... those were the days when I was really into upgrading cars.....  we had the Sega Genisis cd in that truck with a huge LCD tv above the rearview mirror too.....  good times.....
blah blah blah
ers1121 
Copper - Posts: 110
Copper spacespace
Joined: January 23, 2004
Location: New Jersey, United States
Posted: January 14, 2007 at 5:16 PM / IP Logged  

Bypassing the safety stuff is easy. When you accidently leave it in gear, and it starts and hits something try coming up with a story for the police and your insurance company. Not so easy! 

Ed
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 14, 2007 at 5:57 PM / IP Logged  
Careful gentlemen....the moderators are watching......
Evolution-UK 
Copper - Posts: 192
Copper spacespace
Joined: June 19, 2005
Location: United Kingdom
Posted: January 14, 2007 at 7:13 PM / IP Logged  
As KarTuneMan says......
Remote Start the vehicle
Disarm- unlock the vehicle
Get what ever it is you want then close the doors
Arm - lock the vehicle
Shut down the remote start.
This is what i do with my Clifford Intellistart 4. Its alot better than having to go through the procedure again.
Gav.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer