AstroStart’s manual interface module?

Home / the12volt's Install Bay / Car Security and Convenience / AstroStart’s manual interface module? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

green6767

Copper - Posts: 209

Joined: October 28, 2005

Location: United States

Posted: January 13, 2007 at 10:17 AM / IP Logged

im installing an AstroStart 2101 on a 98 Jeep Wrangler manual transmission. I normally dont do manual transmissions because of the pain with em. The cluth bypass shouldn't be a problem, direct hookup from the starter wire from the astrostart. I am using Astrostart's manual interface module and its throwing me for a loop here. the diagram shows configurations for multiple kinds of setups....and i'm having a hard time figuring this one out. The Jeep only has two doors, and I have found and tested the door pins. Shows positive when door is shut,and negative when door is open. Does anybody know how I would go about using the manual interface with the door pins? The remote starter itself, clutch bypass, and e-brake monitoring shouldn't be an issue. Just how to hook up the interface to the 2 door pins. Thanks for any help guys!!!

Shaun, we are the same height, that is neat!

12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 13, 2007 at 11:08 PM / IP Logged

The white door pin wire NEG(-) goes to the door pin wire. The purple POS(+) door pin, goes to 12V. You need to "use" both.

If you had POS(+) door triggers, you would co0nnect the white door pin wire to ground.....you see, use both.

Yes, take the dark blue starter wire to the yellow/red @ the clutch switch.

The green from the Manual modual, goes to the grey/black in the center console for the ebrake.

Let me know if you need ANY more help...I believe in this product.

Back to Top

green6767

Copper - Posts: 209

Joined: October 28, 2005

Location: United States

Posted: January 15, 2007 at 3:38 AM / IP Logged

i got it figured out before i read the response to my post. I did exactly as you posted! It was way too easy..i was just overthinking it. Its actually a great product and i would consider doing more manual transmissions with this thing. Thanks for the reply though!

Shaun, we are the same height, that is neat!

12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

AstroStart’s manual interface module?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.