99 honda civic dx hatch

Home / the12volt's Install Bay / Car Security and Convenience / 99 honda civic dx hatch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: January 26, 2007 at 3:05 AM / IP Logged

I had a question about door power locks in the civic, since it is a DX all manuel locks etc., I wanted to know if there are wires already there to convert to power locks?? or I would have to make my own wires for them??

Also what kind off lock system should i use?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 26, 2007 at 8:15 AM / IP Logged

There is only one thing to check. Look for the factory keyless module in the drivers kick. This might have the wires on that that would lead to a factory harness inside the door....but I am not for sure.

These are the colors to look for. Pull the door panal, use a DMM, and do a continuity check.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 26, 2007 at 11:46 AM / IP Logged

all DX honnda do not have any wiring for doorlocks.

you can get the whole harness for power-conversion from junkyard and its a direct install.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: January 27, 2007 at 8:45 PM / IP Logged

cool, thanks...

Yea, I thought it would have but I guess no....

I guess ill just wire it my self, Im gonna do it this sunday and he wants the alarm installed to be safe... so yea thanks....

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: January 28, 2007 at 8:30 PM / IP Logged

ok, finished the install... but wanted to know were I can find the hand break wire and color of it??

Need to know ASAP........

Back to Top

dre187

Copper - Posts: 129

Joined: November 24, 2006

Location: Canada

Posted: January 28, 2007 at 8:59 PM / IP Logged

RED / green in drivers kick panel. if i remember correctly, there are about 2 or 3 wires of the same colour, so just check the wire first.

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: January 28, 2007 at 9:17 PM / IP Logged

cool thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 honda civic dx hatch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.