the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1996 Jetta Keyless Entry


Post ReplyPost New Topic
< Prev Topic Next Topic >
Tommyboy 
Member - Posts: 2
Member spacespace
Joined: February 02, 2003
Location: United States
Posted: February 02, 2003 at 5:52 PM / IP Logged  

I need some help installing an AutoPage RF1055KE on my 1996 Jetta GLS.  It has power windows and door locks and factory alarm.  A complete wiring diagram and tips on how to "find" the wires would be appreciated.  I installed the unit according to a wiring diagram I got from another forum, but it does not appear to be working properly.  Here is what I believe was done correctly:

Parking lights (gry/blk and gry/red) behind dash hooked up and diode isolated

Door lock wire (gray) behind driver's kick panel hooked to +pulse

Door unlock wire (green) behind driver's kick panel hooked to ++pulse

I was not able to determine exactly where the ignition switch harness was located, so my power wire connections may be incorrect (if it matters)

I would like to connect the horn wire for "chirp" confirmation and panic features

I would also like to connect the accessory output to my trunk release wire.

Thanks for help/tips!!

sst
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 02, 2003 at 6:55 PM / IP Logged  

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|red          10  ga.|+  |ign. harness - big          |
|          STARTER|RED / black     10 ga.|+  |loop at back of             |
|         IGNITION|black         16 ga.|+  |fuse box                    |
|  SECOND IGNITION|*8                  |   |                            |
|        ACCESSORY|BLACK / YELLOW  12 ga.|+  |                            |
|       POWER LOCK|yellow/red or gray  |+  |driver door harness in kick |
|     POWER UNLOCK|RED / blk or green *2 |+  |driver door harness in kick |
| PARKING LIGHTS +|gray/red, gray/black|   |back of lt.switch *3        |
| PARKING LIGHTS -|                    |   |                            |
|       HEADLIGHTS|WHITE/ black         |+  |back of light switch        |
|     DOOR TRIGGER|BROWN / white         |-  |dr. kick or alarm mod *7    |
|  TRUNK/HATCH PIN|BROWN / black         |-  |dr. kick or alarm mod *7    |
|         HOOD PIN|BROWN / red           |-  |behind fuse box             |
|TRNK/HTCH RELEASE|gray *4             |   |switch                      |
|  FCTRY ALARM ARM|same as lock        |+  |                            |
|FCTRY ALRM DISARM|same as unlock *5   |+  |                            |
|       TACHOMETER|*1                  |   |*1                          |
|       BRAKE WIRE|RED / black           |+  |brake pedal switch          |
|     HORN TRIGGER|BLACK / YELLOW        |+  |behind fuse box             |
|           WIPERS|                    |   |                            |
|  LF WINDOW UP/DN|not recommended *6  |   |                            |
|  RF WINDOW UP/DN|not recommended *6  |   |                            |
|  LR WINDOW UP/DN|not recommended *6  |   |                            |
|  RR WINDOW UP/DN|not recommended *6  |   |                            |

Notes:

*1 On the 4 cylinder model find a green at the coil on the firewall.  The VR6 has a BLACK/ purple at the coil pack.  The coil pack is located on the right side of the motor towards the front.  *2 Requires a double pulse to unlock.  *3 Hidden release tab for light switch on upper left side of switch.  Use relays to isolate the switch side of parking light wires from seeing 12v, or the igniton circuit will pulse with the light flash.  It is also possible to use the hazard lights.  The colors are BLACK/ white and BLACK/ green, and are positive trigger.  They can be found at the alarm module or steering column.  *4 Gray wire grounded by switch at rest. Use a relay to isolate the switch side of the trunk release wire from seeing 12v.  *5 Use a single pulse to disarm without unlocking.  *6 Each power window motor is controlled by a module, the module and the window motor are built together as one piece, not allowing access to the motor wires  *7 The alarm module is located behind the headlight switch.   *8 There is a positive trigger key sense wire at the ignition switch or in the radio harness.  The wire color is BROWN / red.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer