door actuators, 95 Mazda Mx3

Home / the12volt's Install Bay / Car Security and Convenience / door actuators, 95 Mazda Mx3 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

elnoyl

Member - Posts: 8

Joined: May 14, 2003

Location: United States

Posted: January 30, 2007 at 10:22 PM / IP Logged

I want to add actuators to the drivers and passenger door on my 95 Mazda Mx3. I was wondering which actuators to go with? I found the dei 524T actuators. I am hooking them up to a compustar 900fm as. I was wondering so do i just split the unlock and lock wires off the harness and connect them to each actuator? How difficult of a job am i looking at? I have done alarm installs just never have added actuators. Do i need relays? I noticed some actuators are 5 wire and some are 2. Please walk me through the process so i can be prepared for the job. Thanks in advance

max

captainzab

Silver - Posts: 606

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 09, 2005

Location: United States

Posted: January 31, 2007 at 12:06 AM / IP Logged

do a search about doorlock actuators. (MASSIVE REPEAT)

you will find out that all 2 wire actuator are the same, just retagged by different companies.

countinue searching and you will find out how to wire up the relay.

you can also go to basic>relay and read how to wire up reversing polarity.

door actuator search result

(do a seperate search on how to wire up relay for aftermarket actuators if you need more help)

Note: You Always Dont Get What You Pay For.

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: January 31, 2007 at 9:08 AM / IP Logged

a company called sonic electronix have the cheapest locks about 15 each and the wiring requires 2 relays and the hardest part of the job is to hide the actuator .. it took me about 2 hrs to do a two door car to make the install perfect so be prepared

Confidence is the key to any project!!

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: January 31, 2007 at 9:12 AM / IP Logged

here is the relay set up door actuators, 95 Mazda Mx3 -- posted image.

Confidence is the key to any project!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door actuators, 95 Mazda Mx3

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.