autostart any idea where to connect?

Home / the12volt's Install Bay / Car Security and Convenience / autostart any idea where to connect? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

megatfauzi76

Copper - Posts: 93

Joined: December 14, 2006

Location: Malaysia

Posted: February 01, 2007 at 8:11 PM / IP Logged

Hai..

I just install autostart to my car..My Problem..My alarm dont have any aux channel..So I use my lock button at my remote to start the engine..Press the lock button 3 times in 3 sec than the engine start..To shutdown the engine do the same thing..

Now Im scared if i always press the lock button 3 times in 3 sec to activate the autostart..it can break or damaged my door lock motor and my window roll up(529t)..

Can i use 611T or 528T...to solve this problem? Any idea? To start the car, Press the lock button continously for 3 sec( I set my autostrat module 1 pulse to start).. To lock the door, press te lock button like normal...Can i do this using 611T or 528T?

Can anyone help me? Guide me about the wiring? Also anyone have diagram for 611t and 528T?

Thank you

imseth85

Copper - Posts: 71

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 16, 2006

Location: United States

Posted: February 02, 2007 at 12:30 AM / IP Logged

this won't screw up anything, this is how most shops wire up starters to factory alarms. The actuator definitely cools down in between pulses even at that rate. They're built to take it.

Seth Alvo NY

Mobile Electronics Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autostart any idea where to connect?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.