’05 pathfinder, xk07 immobilizer interface

Home / the12volt's Install Bay / Car Security and Convenience / ’05 pathfinder, xk07 immobilizer interface (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: February 02, 2007 at 6:01 PM / IP Logged

has anyone used the flashlogic/transponder bypass XK07 transponder interface for a 2005 pathfinder? their website lists the pathfinder but they dont have refrence wire colors for can hi/lo, or security LED on the chart, i know i can call tech. on monday to find out for sure, just wondering if anyone on here has used it?

http://www.bypasskit.com/Manuals/XK07_PKN3%20D11_I_EN.PDF

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

cutter1122

Copper - Posts: 103

Joined: January 16, 2005

Location: Canada

Posted: February 07, 2007 at 8:23 PM / IP Logged

CAN Bus HI	Blue	Body Control Module	Data signal
	COMMENTS: BCM is located on the right side of steering column. Wire is at pin # 6.
CAN Bus LOW	Pink	Body Control Module	Data signal
	COMMENTS: BCM is located on the right side of steering column. Wire is at pin # 14.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

’05 pathfinder, xk07 immobilizer interface

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.