the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

autopage rs 860, 95 nissan sentra


Post ReplyPost New Topic
< Prev Topic Next Topic >
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: February 07, 2007 at 8:20 PM / IP Logged  
I have this Autopage rs 860. Ive pt it to a Nissan Sentra 95. Ive done a few remote starts, but this is my first time dealing with autopage. The problem is that i dont get a responce and the light blinks raplely. If somebody have any information of what the problem might be or if am missing something please help!
dirty96 
Member - Posts: 2
Member spacespace
Joined: March 24, 2006
Location: United States
Posted: February 08, 2007 at 8:31 AM / IP Logged  
that doesn't make any sense... When is it doing this?  and the lights blink raplely? More info and I mat be able to help
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: February 08, 2007 at 5:14 PM / IP Logged  
i have hook up an autopage rs-860 on to a nissan sentra 95. the problem that i have is that ive try remote starting the car and it wound responce.ive try unlocking the car locking it with the transmitter and it wound respone.the led that came with the alarm is blinking fast. i dont know why, i whant to know if its a bad brain! please help!
Twelvoltz 
Platinum - Posts: 2,384
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 24, 2005
Location: New Jersey, United States
Posted: February 08, 2007 at 6:39 PM / IP Logged  
If you read through that post it really is hard to follow. I would strongly suggest spell checking as well.
Are you saying that your Autopage remotes are not working at all? If the LED is flashing very rapidly, do the remotes need to be programmed first? Checking the installation manual's troubleshooting section should shed some light on this for you.
Installer, IT support, and FFL. I need less hobbies.
dre187 
Copper - Posts: 129
Copper spacespace
Joined: November 24, 2006
Location: Canada
Posted: February 08, 2007 at 7:11 PM / IP Logged  

sounds like you either...

a) didn't connect the hoodpin switch or grounded it

b) didn't ground or connect the neutral safety switch

c) didn't program the tach

d) didn't program the remote


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer