dome light supervision output

Home / the12volt's Install Bay / Car Security and Convenience / dome light supervision output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ren_l

Member - Posts: 4

Joined: March 12, 2007

Location: Canada

Posted: March 12, 2007 at 6:35 PM / IP Logged

i have a 91 acura integra with nothing power "windows -doors" .i want to install my Radiostar generation two way alarm but as far as i know i only have one wire to the dome light and i dont know weather i should connect the negative door trigger the positive door trigger or the dome light supervision cord to this wire.

jjj

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 12, 2007 at 6:41 PM / IP Logged

You can use the dome wire without any problems. For both door trigger and dome supervision.

Back to Top

ren_l

Member - Posts: 4

Joined: March 12, 2007

Location: Canada

Posted: March 12, 2007 at 6:48 PM / IP Logged

so what you are saying is to connect all 3 wires to the dome wire?what exacly dose that dome supervision wire do?

I wont drink and drive its bad

jjj

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 12, 2007 at 7:04 PM / IP Logged

your door trigger is negative so attach your neg door trigger INPUT to the negative dome wire. Also attach the NEG(-) domelight supervision wire to this one as well. It turns the dome light on when you disarm. you can use this wire.

DOORPIN

GREEN/ red

In driver's kickpanel

-

Back to Top

ren_l

Member - Posts: 4

Joined: March 12, 2007

Location: Canada

Posted: March 12, 2007 at 7:10 PM / IP Logged

thanks a million my head was gonna explode .lots of good karma going ur way

jjj

Back to Top

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 12, 2007 at 7:48 PM / IP Logged

You do not need to connect the positive door trigger at all. This wire allows the system to fit more than one type of vehicle. Your vehicle uses negative trigger so just use that one and cap off the positive trigger wire.

You may need a relay for the dome light supervision to operate. I know the DEI systems I deal with do not have enough of an output to run the light bulb in most vehicles from that era. Does your Radiostar unit list an internal relay for supervision or does it just list a 200ma output? If it has the internal relay then you will not need anything extra, if it does not you will probably need a relay.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 12, 2007 at 9:42 PM / IP Logged

ren_l wrote:

thanks a million my head was gonna explode .lots of good karma going ur way

Read my sig..... I need the good karma. Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light supervision output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.