1993 mitsubishi colt, keyless entry

Hi

Just bought a keyless entry kit from eBay to install in my Mitsubishi Colt/Mirage 1993.

Discription:

BW-852- a full featured keyless entry with 4 button remotes, built-in relays, and a universal 2 door lock kit.

2 - four (4) button,  icon style remote transmitters

Plug in LED - Make thieves think you have an alarm!

Plug-in  multi-function, valet / override switch

Remote Panic mode

Horn / siren output

Ignition controlled door lock option - programmable

Programmable door lock pulse time

On-board relay for + park light flash

Output for domelight supervision / illuminated entry

Remote door locking / unlocking with on-board relays

Passenger unlock output

< color=#0000ff >Keyless entry - even in valet mode

< color=blue >Starter disable output

< color=blue >Auxillary output < color=blue > for trunk / hatch release, windows or ??

< color=#0000ff >Code learning receiver

< color=blue >Owners manual & Installation manual

Don't have so mch experience in this field, just some small car stero installations.

I got instructions to mount the lock motors, so I don't think that will be a problem. But I need help to do the wireing.

1. Where should I place the black box (relay?) and where do I plug in all the wires coming from this?

2. There are 2 wires (short ones) from the door motor, where does theese go?

3. How do I program the diffrent functions?

4. There is a small black wire coming from the black box (away from the others), what is this for?

I managed to get a wirering diagram  but I need some help to use this and locate the place where the wires go (and which).

Hope you understood some of my questions, at least.

I will be extremly happy for any help

Andre

Norway