viper 300esp, 01 monte carlo

Home / the12volt's Install Bay / Car Security and Convenience / viper 300esp, 01 monte carlo (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

snakeiz2

Member - Posts: 7

Joined: April 04, 2007

Location: United States

Posted: April 04, 2007 at 8:36 PM / IP Logged

i have a viper 300esp with remote start on a 01 monte carlo is it possible to just replace the brain for an updated dei alarm? wich model could i upgrade to? thanks

snakeiz2

Member - Posts: 7

Joined: April 04, 2007

Location: United States

Posted: April 11, 2007 at 9:28 AM / IP Logged

I have this alarm with remote start when i hade the remote start put in they said i would lose the opening the trunk option But i read that this alarm i has an expandable option and could use a 4button remote as well so how is it that i would lose trunk option? Alarm is in a 01 monte carlo thanks.

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: April 11, 2007 at 10:19 AM / IP Logged

TRUNK RELEASE BLACK (-), Requires #775 Relay @ TRUNK RELEASE SWITCH

look at the 12 pin harness at the module there will be a RED / white wire in pin 12 and hook it to the black wire at the trunk release switch.

snakeiz2

Member - Posts: 7

Joined: April 04, 2007

Location: United States

Posted: April 11, 2007 at 12:28 PM / IP Logged

I read that on tha viper book but then what would be the function on the remote to open it? i have the 2 button remote i press 1 for arm and un-arm and hold the secound one for 3sec. for starting. If i wire the alarm at the 12 pin for the trunk will it automaticly set for a remote 1and 2 at the same time for trunk? or do i have to take to be done with the bitwriter? thanks

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: April 11, 2007 at 12:52 PM / IP Logged

it will be either button 2 held for 2 sec or 1 and 2 together

yiou can check this put with your multimeter if you have one. Test the wire and see what button(s) operate it. it should be button 2 held for 2 sec.

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: April 11, 2007 at 1:11 PM / IP Logged

Here is your install manual. Yes your system offers 2 aux outputs and as already stated holding button II activates channel 2 and pressing I and II activates channel 3.

Installer, IT support, and FFL. I need less hobbies.

snakeiz2

Member - Posts: 7

Joined: April 04, 2007

Location: United States

Posted: April 11, 2007 at 2:43 PM / IP Logged

Im just woundering why my viper installer said i cant is not because of a the key fob of the car is it? I asume since my starter is on the secound button for 2sec. it must be channel 3? so al i need is a relay for the trunk and wirer it up to the trunk release. thanks

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: April 11, 2007 at 5:07 PM / IP Logged

yup

snakeiz2

Member - Posts: 7

Joined: April 04, 2007

Location: United States

Posted: April 11, 2007 at 7:32 PM / IP Logged

The viper hand book says i could upgrade to a 4 button remote, is it possible and if so what would be the the model number for it ? the two button is 471T or is there any other remote i could upgrade to thats compatiable? I searched for the 4 button but cant come up with the right model. Thanks

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: April 11, 2007 at 7:54 PM / IP Logged

474t, 474v, 474p

eash one is eiother valet, viper, python- doesnt matter which one. they should program.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.