07 ford escape keyless entry alarm add on

Home / the12volt's Install Bay / Car Security and Convenience / 07 ford escape keyless entry alarm add on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ddjd

Member - Posts: 3

Joined: April 15, 2007

Location: United States

Posted: April 15, 2007 at 5:57 PM / IP Logged

2007 ford escape w/ audiovox pursuit pro 9232a.

vehicle has oem keyless entry, i am adding an add-on alarm.

confused on door locks, i have 4 wires on alarm(pro 9232a).

GREEN/ black = arm input # 2, red = disarm input # 1, green = arm input # 1, RED / black trace = disarm input # 2.

where can i connect these wires?

please help

___ddjd___

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: April 15, 2007 at 6:38 PM / IP Logged

The green arm wire goes to the pink/black (+) lock motor wire of the vehicle. In harness above kick panel coming in through door boot. Disarm 1 goes to RED / orange (+) unlock motor wire in same location as lock. The RED / black wire will go to the pass. and rear doors unlock motor wire which is pink / YELLOW (+) in drivers door sill. Harness tees under drivers seat. Not really neccesary to hook up the GREEN/ black, make sure you ground it out like the manual says though.

ddjd

Member - Posts: 3

Joined: April 15, 2007

Location: United States

Posted: April 15, 2007 at 7:35 PM / IP Logged

great info thank you so much. except, RED / black connects to pink/orange? alarm now sets with oem keypad.

but for some reason the alam is triggered when the dome light turns off, and does not trigger when dome light is on.

i have the alarm purple wire connected to pink wire @ drivers kick panel.

please help again?

___ddjd___

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: April 15, 2007 at 7:43 PM / IP Logged

Use the brown wire on the alarm. The purple is meant for a positive trigger.

ddjd

Member - Posts: 3

Joined: April 15, 2007

Location: United States

Posted: April 15, 2007 at 7:53 PM / IP Logged

it worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i love you man.

thanks a bunch. 07 ford escape keyless entry alarm add on -- posted image.

___ddjd___

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 ford escape keyless entry alarm add on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.