compustar and 530t problems

 i have a compustar 2wfm-as alarm with remote start and a 530t window module the alarm works fine but im having problems with the window module its all wired up and the one touch down/up works on both windows but on the alarm when i hit the aux button it rolls them up like an inch so i wired it up to a relay with a cap hoping that the cap would stay charged for 4.5 to 5 second to roll the windows all the way up well it did it once and the i rolled the windows back down and hit the button again and nothing happened well then i later found out that the aux output is not puting out a negative pulse anymore instead its a constant negative now. so when i touch the wire from the 530t to the aux output on the compustar the windows automaticly roll up without touching nothing.so i was wondering did i burn the channel up or something? any help would be  appreciated.

Its probably latching the aux you need a compuprogrammer find a compustar dealer and they should be able to help you

you probably had it wired to pulse only.  When you hit the aux once it will "vent" the window.  Its meant to do that. when holding the button for 4.5 secs it will roll all the way down.  There probably was no need for the relay you were using.  You needed to have the aux on validity in order to work, it was probably on pulsed.

You can't do validity on compustar it's only a timed pulsed output or a latched output validity is a dei option

really? did not know that.  validity gives a pulse on DEI alarms as long as you hold the button.  would that mean you wouldn't be able to vent the windows???

thanks for all the replys im going to mess with it today but i do have another question can i do laching on it since my compustar only puts out a constant negative and not a pulse like it use to im also going to try to contact a compustar programmer and see if he can tell me whats wrong or if i have to send it to them or something like that.ill post a reply on what happens.thanks

it sounds like you damaged the output of the Compustar alarm.  If you didn't change the programming but the output is now on 100% of the time I would suspect hardware failure.Kevin Pierson

so i called compustar and there programmer told me pretty much the aux outputs are burned so thats it i have to buy a new brain but he said when he does windows he puts it on like a timed relay or timed latch for 5 seconds anyone know how to do that the ones on this sit are just latch mometary or something like that.thanks

They won't cover that under warranty? Kevin Pierson