power door locks

I installed 2 power door locks in my 92 civic hatch eg, I have them wired up properly to the unlock but I can't figure out why they won't lock. I installed the 2 relays but I just need to know what wires off the alarm will lock/unlock the doors. According to the wiring instructions green = (-) unlock output which is correct and is working but brown = (-) lock output which isn't working afaik any help is appreciated because I wanna finish this I've had my door panels off for a week and I've been loafting

I don't see an edit button but I forgot to state it's the prostart ct-5460

is the brown wire dropping to ground (0 vdc) when you press the lock button on the keyfob?The search function is your friend.

no. The green grounds when I press unlock, the brown doesn't ground for lock or unlock

blue = trunk/ aux3 (-)

if the brown isn't working, you may have to use blue as your unlock wire.The search function is your friend.

it already unlocks.... the problem was locking.. I hooked it up to the white brown wire WHITE/ brown = (-) rearm output

well doneThe search function is your friend.