alarm programing latched

Home / the12volt's Install Bay / Car Security and Convenience / alarm programing latched (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

65gtoconv

Member - Posts: 2

Joined: June 29, 2007

Posted: June 29, 2007 at 5:37 AM / IP Logged

i have a black widow alarm and im trying to get the aux/trunk wire to switch from the momentary setting to the "latched" setting,,, but i cant get it to work.

i press the valet button 5 times then 9times for the aux and then bottom#4 for latched... but its not switching over.. im at my wits end with this thing,, what im i doing wrong

Back to Top

fkelsey

Copper - Posts: 94

Joined: March 16, 2007

Posted: June 29, 2007 at 8:59 AM / IP Logged

Turn the ignition to the run not start setting. Push the valet 5 times the alarm should chirp. Pust the button the number of times to match the desired setting the alarm should chirp along with each push. Push the corresponding button on the remote.

Back to Top

fkelsey

Copper - Posts: 94

Joined: March 16, 2007

Posted: June 29, 2007 at 9:02 AM / IP Logged

Models I have in the shop number 12 is the aux 2 mode and button 3 on my remotes make it latched but it could be different on yours. There are a couple of models floating ou there.

Back to Top

65gtoconv

Member - Posts: 2

Joined: June 29, 2007

Posted: June 29, 2007 at 11:02 AM / IP Logged

i got it working,, thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm programing latched

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.